Awnings, light and climateat a touch
Motorised awnings and blinds, air conditioning in every bedroom and lights that switch on by themselves. The whole house runs on home automation.
How it worksThe whole house on one screen
On the dining-room wall, next to the kitchen, there is a tablet with SantVerd drawn in 3D. Tap a window and its awning or blind goes up or down. Tap a light bulb and the light comes on.
From the same screen you set the air conditioning in the living room and each bedroom, see the temperature outside and play the radio or your Spotify through speakers all over the house.
- Lights
- In the living room and the garden. Each light can be switched on from the screen
- Awnings and blinds
- Motorised: awnings on the living-room windows and blinds in every bedroom
- Climate
- Air conditioning in the living room and every bedroom. Ceiling fans in the bedrooms
- Music
- Radio or your Spotify through speakers all over the house
- Control
- Home Assistant, on a tablet on the dining-room wall
From the screen to the house
On the dining-room wall, next to the kitchen, with SantVerd drawn in 3D.
In the living-room view, each window has its own buttons to raise, stop and lower.
The living-room awnings soften the light and keep the garden in view.
What the house does by itself
SantVerd is a certified Passive House, built to use very little energy. The smart home does the rest without you having to touch a thing.
Awnings
They come down on their own only when they are really needed. The sun and the temperature decide.
Air conditioning
In the living room and every bedroom. If a door or window is left open, it stops by itself so as not to waste energy.
Living-room lights
They come on when they detect someone and go off when nobody is left.
Garden lights
They come on by themselves at dusk and go off by themselves at a set time, so as not to disturb the neighbours.
Pool
The pool pump decides how long its motor runs according to the temperature outside.
